#ARGEN PLATING PLUS#
#ARGEN PLATING FREE#

at 600☌ / 1112 ✯Ĭeramic alloys use diamond paste and/or Tripoli and rouge with soft bristles andĬhamois wheels.

#ARGEN PLATING FREE#

The soldering surfaces should be parallel, smooth and free of debris. The soldering investment should not come in contact with the ceramic. Cover ceramically-veneered units with wax before investing. Then place in furnace for entry and maturing.Ġ.05 - 0.2 mm. 250☏ ).it will take approximately 8-10 minutes or until the opaque turns chalky white or flat color. This is placed on top of the burner set a low to medium setting ( approx. The units are placed on a honeycomb sagger tray with metal pins. We recommend drying paste opaque from the inside out this is done by utilizing a hot plate. For a better bond, fireĪ thin wash 10 - 15 ☏ (10 ☌) above normal temperature, followed by regular The recommendations of the porcelain manufacturer. If flux is used, it should be water soluble. Preheat invested units and pressure blast with 50 micron just before soldering to remove oxide. The solder joints should be parallel and free of debris. Hold 10 min, Removal of oxide optional, no vacuumīe as large as possible (at least 5 mm²). Water in an ultrasonic cleaner for 10 minutes. Do not exceed a blast pressure of 4 bars or 60 psi. Blast with non-recycled 50 micron aluminum Metal surfaces for porcelain application with non-contaminating aluminum DO NOT quench in water.Īnd sandblast with 50 micron aluminum oxide, be careful of margins. May require adjustment based upon the alloy and the amount of metal being Proportions should be one-part fuel to two-parts oxygenĬrucible and a casting temperature of a least 150☌ / 300☏ over liquidus Ensure that the flame is on a Neutral setting when casting. You are using a rapid fire investment, follow the manufacturer's instructions.Ĭlean buttons and at least 35 percent new alloy.Įither a natural gas/oxygen or a propane/oxygen torch with a multi-orifice

#ARGEN PLATING PLUS#

To 815 ☌ / 1500 ☏ for 1 hour plus 10 minutes for each additional ring. Time, place the ring(s) in a room temperature oven and raise the temperature (6 mm) of investment from the top of the pattern to theġ1.1 g/cm 3 * (Wax Weight) = Required Alloy Quantity.ĭebubblizer and blow off any excess before investing.

Long sprues coming from a domed central entry point. (3 mm)long and joining theīar to the sprue base with 8 gauge (3.3 mm diameter) and 1/2in. With 10 gauge (2.6 mm diameter) sprues 1/8 in. Investment from the top of the pattern to the top of the investment.Ī 6 gauge (4.1 mm diameter) runner bar, connecting the units to the bar Lingual eyelet rings help supportĭirect sprues, 8-10 gauge, (3.3-2.6 mm diameter) and 1/2 in. Have lingual collars and no sharp corners. The harmonic purity, sustain and deep tone of these plated bass strings surpasses all other manufacturer's products. The owner is so nice with the guests and takes care to offer the best quality Always a great spot to get great food. PRODUCT DESCRIPTION Argento string sets feature a new process of extra fine silver-plating for the handmade wound basses. The prices are fair for the portion size. A minimum wax thickness of 0.3 to 0.4 mm. Hours: 11AM - 9PM 1198 State University Dr, Fort Valley Menu Ratings Google 5 Reviews for Argen Latin Cafe April 2022 Amaazing food Very tasty.

Argen plating